But I did mention what I had used to make the partitions AND to copy the
existing drive, Western Digitals software -DATA LIFEGUARD TOOLS. I am not
very pleased with it to say the least. But my issue isn't really with the
SATA drive it is TRYING to bring the EXISTING one back from having its drive
letter changed from C: to E: while leaving most of the Services it was
running as the C: drive letter so now most of them aren't working at all,
including my Norton AV or even Internet Explorer just for starters.
Is it possible to use XPs backup with a usb thumb drive instead of a floppy?
If I do follow the other steps in KB223188 what else will I need to do to get
the drive back in working order?

"DL" wrote:

> The backup application included with winxp was written in the days when cd's
> did not exist & has not being updated.
> There are numerous third party backup applications.
> There is no need to use third party tools to partition/format the new drive,
> winxp has all the tools required, using third party tools can cause
> problems, and unless you have a very good reason for using fat32 you should
> be using ntfs.
> You dont mention what you used to copy your winxp partition.
>
> "rq2000" <rq2000@discussions.microsoft.com> wrote in message
> news:1AD5B824-27C2-4DB7-A927-C278CD497827@microsoft.com...
> >I recently added an internal Western Digital 500 GB SATA2 Drive into a
> > fairly new computer(less than two months old Phenom 9600) I used the
> > included
> > software to attempt to format and partition the drive into 4 sections. I
> > wanted to makle this my primary drive so I could take out the old 30 GB
> > drive
> > I had laying around that was very slow. The software included was DATA
> > LIFEGUARD TOOLS and GOOGLE software. The partitions initailly were set up
> > backwards of how I wanted so I started over again and attempted to do it
> > opposite of the way I had previously. This time it worked like it should
> > have in the begining and set it up like I had told it to do, not how I
> > actually wanted it to be. I had it set it up as a boot partition so my
> > main
> > drive was copied (taking several hours which surprised me 22GB would take
> > that long) After seeing that XP was copied to a FAT32 partition I thought
> > it
> > wouldn't possibly load correctly and was meaning to change it. Before I
> > got
> > the opportunity my power failed computer shutdown and rebooted but hung on
> > startup right before login screen. So I put in my Windows XP disk and
> > attempted a repair install. After running what appeared to be a regular
> > install I managed to get my main drive back up and running but the drive
> > letter was changed (from drive C: to drive E ; however, most of my
> > services are now not working as they are set to DRIVE C: . This is
> > completely frustrating as now I can't even use IE7 and attempting to do so
> > brings a failure and starts dr. watson error reporting with a link I can't
> > go
> > to and brings about another dr watson report. PLEASE HELP ME. My questions
> > are after reading KB223188 How to restore a the system boot drive letter
> > in
> > Windows once this is done will I still have to do another repair. Also why
> > is
> > it necessary to have the backup utility included in windows use a FLOPPY
> > DRIVE to save the information to even begin to use. I was under the
> > impression that this was going to be fixed in the next service pack (SP3)
> > so
> > a USB drive would be sufficient to store the information needed for the
> > restore. Since I do NOT HAVE a Floppy drive in this machine, should I try
> > and
> > salvage one from an old machine just to make a backup of my data BEFORE
> > attempting to fix the drive letter issue?
>
>
>