Dean,
in device manager select your USB device, right click Properties, open tab
Policies and you see the
writing cache status. Default for removable device is OFF.
If your image is unable to open device manager search the key
"UserRemovalPolicy" for your device
using regedit.
Values I found are 3 No cache 2 cache on.
The full path should be:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\< XXX>\<YYY>\<ZZZ>\DeviceParameters\Classpnp
X Y and Z are ID for your device.
Regards
Raffaele


"DPM" <dm@junk.com> ha scritto nel messaggio
news:OMC5lO0xIHA.2340@TK2MSFTNGP04.phx.gbl...
> I've built 2 images: one on SP2/FP2007 and the other on
> SP2/FP2007/UpdateRollup1. First runs on a AMD MB, second on an Intel.
>
> Now: my application writes a few files to a USB flash drive. On the first
> image when the flash LED stops blinking I can remove it, plug it into a PC
> and my files are there. On the second, after the initial flashing stops
> if I pull it out - no files. If I leave it in, 20-30 seconds later
> there's more LED activity, then if I pull it my files are there.
>
> So: was write caching turned on in UR1, or is this a function of my
> hardware? Are there registry entries that control this?
>
> If someone has any insight I'd be grateful.
>
> Thanks,
> Dean
>
>