Hello again.
I read attentively your link. I checked all things described in this
page, and all is well configured on my computer.
But the remote access still doesn't work.
When a friend tries to connect to my computer, there is no event in the
log viewer.
It just... Doesn't work. Nothing, no error message. :/

Sooner Al [MVP] wrote:
> The home PC, ie. the Remote Desktop [RDC] host/server, must have RDC
> enabled. If the PC is behind a router or a firewall or both then you
> also need TCP Port 3389 open/forwarded on the router/firewall. You call
> using the public IP of the home PC if its directly connected to the
> internet or the public IP of the router. So...
>
> What type of internet connection do you have at home, ie. cable or DSL
> or dialup? Keep in mind many DSL modems are also routers so you either
> need to forward TCP Port 3389 or put the device in a bridge/pass-through
> mode.
>
> Are you calling the correct address?
>
> Have you forwarded/opened TCP Port 3389?
>
> See this page for help, etc...
>
> http://theillustratednetwork.mvps.or...eshooting.html
>
>