"Dima" <kopn@bk.ruDelete> wrote in message
news:efQjV%23$YIHA.1532@TK2MSFTNGP04.phx.gbl...
> Thanks Brian for the file!
> Will the driver work with the Windows Scanner and camera Wizard in Windows XP?

Should work out just fine unless it decides to sqwauk about the drivers being
older, in that case you would have to uninstall the presently installed drivers
first. If the scanner gets connected after the drivers are installed, you will most
likely need to uninstall the present drivers first. If that's the case:

Create a new folder and extract the files from the .zip file into the newly created
folder.
Shut down and disconnect the scanner USB cable.
Boot to Safe Mode and uninstall Any/All scanjet scanner devices listed in Device
Manager.
In DM right click on the device and click Uninstall in the popup menu.
Close out back to the desktop when finished uninstalling any/all scanjet devices.
Open either MyComputer or Explorer.

Delete the contents of:

c:\documents and settings\your username folder\local settings\temp

c:\windows\temp

c:\prefetch

Close out of MyComputer or Explorer and reboot.

Follow the proper steps to install/connect the drivers/scanner when back at your
normal desktop.
When using the scanner/camera install wizard click the Next in the first window.
Click the Have Disk button.
Click the Browse button and navigate to the folder you extracted the files into.
Select the HPscan.inf file and click the Open button.
Click the OK button to start installing the drivers.


--
Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375



>> "Dima" <kopn@bk.ruDelete> wrote in message
>> news:OEn9e1%23YIHA.3880@TK2MSFTNGP05.phx.gbl...
>>> Hello!
>>> How to reinstall MS WIA driver for a scanner HP scanjet 5p? The MS WIA driver was
>>> installed automatically from the beginning and the scanner worked. But then HP
>>> recommended to intall HP DeskScan 2.9 for advanced scanning. The HP DeskScan 2.9
>>> installation shows an error No IRQ for HP SCSI card, although HP SCSI card works
>>> fine, has IRQ 10 and does not conflict with anything. Then HP
>>> recommended to intall HP PrecisionScan 2.03 pro. HP PrecisionScan 2.03 pro caused
>>> a pink tint on photos. I uninstalled it. Now Windows Scanner Wizard does not see
>>> the scanner. Autoupdate of a driver does not reinstall the WIA driver. The manual
>>> driver update does not show the MS WIA driver or any other signed driver for the
>>> HP scanjet 5p in the list.
>>> Best regards,
>>> Dima
>>>
>>
>> Here's driver version 5.1.2600.0 - 1 Jul 2001 - WinXP, Win2003 - models ScanJet
>> 3300C, ScanJet 5p, ScanJet 4p, ScanJet 3p, ScanJet IIcx, ScanJet IIp, ScanJet IIc,
>> ScanJet 5100C, ScanJet 4200C and ScanJet 4100C - manufacturer HP and Microsoft.
>>
>> Files included in the .zip file are: wiafbdrv.dll, hpsjmcro.dll, hpscan.inf and
>> usbscan.sys.
>> http://basconotw.mvps.org/inq4.htm
>>
>>
>>
>> Although I run a virus scan on the files before I offer them, you should as well
>> whenever receiving files from others.
>>
>>
>> --
>> Brian A. Sesko { MS MVP_Shell/User }
>> Conflicts start where information lacks.
>> http://basconotw.mvps.org/
>>
>> Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
>> How to ask a question: http://support.microsoft.com/kb/555375
>>
>>
>
>