Scanner is not listed

For several years, I have a Canon scanner and printer installed. Both work
fine. However, some of the image editors could not "find" this scanner on my
system. In Device Manager, under the Imaging Devices only Logitech Cam is
listed. Under ports - Communication port (com1) and ECP Printer Port (LPT1)
are listed. There is no question mark or warning anywhere.
May someone please tell me how to make this scanner "visible" for all
imaging programs.

--
Ilya Zeldes
Fort Myers, Florida

If you install the Canon Software and Drivers for the Scanner does it
work Ok.?


"ilyaz" <ilyaz33@hotmail.com> wrote in message
news:ecoHRZYrIHA.4376@TK2MSFTNGP06.phx.gbl...
> For several years, I have a Canon scanner and printer installed. Both work
> fine. However, some of the image editors could not "find" this scanner on
> my system. In Device Manager, under the Imaging Devices only Logitech Cam
> is listed. Under ports - Communication port (com1) and ECP Printer Port
> (LPT1) are listed. There is no question mark or warning anywhere.
> May someone please tell me how to make this scanner "visible" for all
> imaging programs.
>
> --
> Ilya Zeldes
> Fort Myers, Florida
>

See if the software has an option to pick or select a 'Twain' driver.
If so then pick the Canon scanner as it should be listed as one of the input
sources.

JS

"ilyaz" <ilyaz33@hotmail.com> wrote in message
news:ecoHRZYrIHA.4376@TK2MSFTNGP06.phx.gbl...
> For several years, I have a Canon scanner and printer installed. Both work
> fine. However, some of the image editors could not "find" this scanner on
> my system. In Device Manager, under the Imaging Devices only Logitech Cam
> is listed. Under ports - Communication port (com1) and ECP Printer Port
> (LPT1) are listed. There is no question mark or warning anywhere.
> May someone please tell me how to make this scanner "visible" for all
> imaging programs.
>
> --
> Ilya Zeldes
> Fort Myers, Florida
>

Of course, the scanner is listed as source in, let say, Photoipact, MS Photo
Premium, but PAINT.net would not find it... It's a mystery to me...
Ilya

"JS" <@> wrote in message news:%2327X2pYrIHA.4560@TK2MSFTNGP03.phx.gbl...
> See if the software has an option to pick or select a 'Twain' driver.
> If so then pick the Canon scanner as it should be listed as one of the
> input sources.
>
> JS
>
> "ilyaz" <ilyaz33@hotmail.com> wrote in message
> news:ecoHRZYrIHA.4376@TK2MSFTNGP06.phx.gbl...
>> For several years, I have a Canon scanner and printer installed. Both
>> work fine. However, some of the image editors could not "find" this
>> scanner on my system. In Device Manager, under the Imaging Devices only
>> Logitech Cam is listed. Under ports - Communication port (com1) and ECP
>> Printer Port (LPT1) are listed. There is no question mark or warning
>> anywhere.
>> May someone please tell me how to make this scanner "visible" for all
>> imaging programs.
>>
>> --
>> Ilya Zeldes
>> Fort Myers, Florida
>>
>
>

Found this in the Paint.net forum:
http://paintdotnet.forumer.com/viewtopic.php?t=1587

JS

"ilyaz" <ilyaz33@hotmail.com> wrote in message
news:ukgzp3YrIHA.2068@TK2MSFTNGP05.phx.gbl...
> Of course, the scanner is listed as source in, let say, Photoipact, MS
> Photo Premium, but PAINT.net would not find it... It's a mystery to me...
> Ilya
>
> "JS" <@> wrote in message news:%2327X2pYrIHA.4560@TK2MSFTNGP03.phx.gbl...
>> See if the software has an option to pick or select a 'Twain' driver.
>> If so then pick the Canon scanner as it should be listed as one of the
>> input sources.
>>
>> JS
>>
>> "ilyaz" <ilyaz33@hotmail.com> wrote in message
>> news:ecoHRZYrIHA.4376@TK2MSFTNGP06.phx.gbl...
>>> For several years, I have a Canon scanner and printer installed. Both
>>> work fine. However, some of the image editors could not "find" this
>>> scanner on my system. In Device Manager, under the Imaging Devices only
>>> Logitech Cam is listed. Under ports - Communication port (com1) and ECP
>>> Printer Port (LPT1) are listed. There is no question mark or warning
>>> anywhere.
>>> May someone please tell me how to make this scanner "visible" for all
>>> imaging programs.
>>>
>>> --
>>> Ilya Zeldes
>>> Fort Myers, Florida
>>>
>>
>>
>
>

Thanks, JS, this answers my question!
Appreciate your help.
Ilya

"JS" <@> wrote in message news:OgS6MDZrIHA.4876@TK2MSFTNGP02.phx.gbl...
> Found this in the Paint.net forum:
> http://paintdotnet.forumer.com/viewtopic.php?t=1587
>
> JS
>
> "ilyaz" <ilyaz33@hotmail.com> wrote in message
> news:ukgzp3YrIHA.2068@TK2MSFTNGP05.phx.gbl...
>> Of course, the scanner is listed as source in, let say, Photoipact, MS
>> Photo Premium, but PAINT.net would not find it... It's a mystery to me...
>> Ilya
>>
>> "JS" <@> wrote in message news:%2327X2pYrIHA.4560@TK2MSFTNGP03.phx.gbl...
>>> See if the software has an option to pick or select a 'Twain' driver.
>>> If so then pick the Canon scanner as it should be listed as one of the
>>> input sources.
>>>
>>> JS
>>>
>>> "ilyaz" <ilyaz33@hotmail.com> wrote in message
>>> news:ecoHRZYrIHA.4376@TK2MSFTNGP06.phx.gbl...
>>>> For several years, I have a Canon scanner and printer installed. Both
>>>> work fine. However, some of the image editors could not "find" this
>>>> scanner on my system. In Device Manager, under the Imaging Devices only
>>>> Logitech Cam is listed. Under ports - Communication port (com1) and ECP
>>>> Printer Port (LPT1) are listed. There is no question mark or warning
>>>> anywhere.
>>>> May someone please tell me how to make this scanner "visible" for all
>>>> imaging programs.
>>>>
>>>> --
>>>> Ilya Zeldes
>>>> Fort Myers, Florida
>>>>
>>>
>>>
>>
>>
>
>

You're welcome.

JS

"ilyaz" <ilyaz33@hotmail.com> wrote in message
news:eiRKz5drIHA.4928@TK2MSFTNGP04.phx.gbl...
> Thanks, JS, this answers my question!
> Appreciate your help.
> Ilya
>
> "JS" <@> wrote in message news:OgS6MDZrIHA.4876@TK2MSFTNGP02.phx.gbl...
>> Found this in the Paint.net forum:
>> http://paintdotnet.forumer.com/viewtopic.php?t=1587
>>
>> JS
>>
>> "ilyaz" <ilyaz33@hotmail.com> wrote in message
>> news:ukgzp3YrIHA.2068@TK2MSFTNGP05.phx.gbl...
>>> Of course, the scanner is listed as source in, let say, Photoipact, MS
>>> Photo Premium, but PAINT.net would not find it... It's a mystery to
>>> me...
>>> Ilya
>>>
>>> "JS" <@> wrote in message
>>> news:%2327X2pYrIHA.4560@TK2MSFTNGP03.phx.gbl...
>>>> See if the software has an option to pick or select a 'Twain' driver.
>>>> If so then pick the Canon scanner as it should be listed as one of the
>>>> input sources.
>>>>
>>>> JS
>>>>
>>>> "ilyaz" <ilyaz33@hotmail.com> wrote in message
>>>> news:ecoHRZYrIHA.4376@TK2MSFTNGP06.phx.gbl...
>>>>> For several years, I have a Canon scanner and printer installed. Both
>>>>> work fine. However, some of the image editors could not "find" this
>>>>> scanner on my system. In Device Manager, under the Imaging Devices
>>>>> only Logitech Cam is listed. Under ports - Communication port (com1)
>>>>> and ECP Printer Port (LPT1) are listed. There is no question mark or
>>>>> warning anywhere.
>>>>> May someone please tell me how to make this scanner "visible" for all
>>>>> imaging programs.
>>>>>
>>>>> --
>>>>> Ilya Zeldes
>>>>> Fort Myers, Florida
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>