Standby/Resume Problem - Winlogon Vs MinLogon

Hi There,

I had a post earlier about standby/resume functionality on XPE. I tested
this feature on XP Pro and it works fine. I couldn't make it work on XP
Embedded. I have all the ACPI components, I am using Winlogon. Are there any
other components I am missing ?. Why is it working on XP Pro and not on XPE
?.

I select Standby using the Start Menu (Turn Off Computer/Standby), the
system is getting into Standby mode without any problem, the issue is waking
up. It won't wake up and I had to restart the machine.

Any ideas why this is happening ?

Thanks
SC


KM,

I am having problems with Windows XP Embedded standby mode. Win XP Pro is
working fine. I have included all the necessary ACPI components. I am using
Winlogon. Do you know what I may be missing ?. XP Embedded worked just once
and it stopped working. XP Pro is fine all the time.

thanks
SC

"Schockal" wrote:

> KM,
>
> It worked with Winlogon, do you know why Minlogon is not working ?. Is there
> a patch for the standby/resume problem for Minlogon ?. Please let me know.
>
> thanks
> SC
>
> "Schockal" wrote:
>
> > I am having problems coming out of standby mode. Windows XPE goes to standby
> > mode when I pressed the "Standby" on bezel key of my display. Windows never
> > responds when its in "standby".
> >
> > Do you know what could be the reason ?. My BIOS has some power settings S1,
> > S3 and S1/S3. The current setting is S3, I also tried S1. It didn't make any
> > difference.
> >
> > One thing I should mention is that it was working fine with XP Pro.
> >
> > Thanks
> > SC

1. Do you have the video driver for your video card in the image?
2. Did you check to enable Hibernation in the ACPI computer component?

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit

"Schockal" <Schockal@discussions.microsoft.com> wrote in message
news:CA2F5C20-C50F-4367-A71B-90F8C5890D78@microsoft.com...
> Hi There,
>
> I had a post earlier about standby/resume functionality on XPE. I tested
> this feature on XP Pro and it works fine. I couldn't make it work on XP
> Embedded. I have all the ACPI components, I am using Winlogon. Are there
> any
> other components I am missing ?. Why is it working on XP Pro and not on
> XPE
> ?.
>
> I select Standby using the Start Menu (Turn Off Computer/Standby), the
> system is getting into Standby mode without any problem, the issue is
> waking
> up. It won't wake up and I had to restart the machine.
>
> Any ideas why this is happening ?
>
> Thanks
> SC
>
>
> KM,
>
> I am having problems with Windows XP Embedded standby mode. Win XP Pro is
> working fine. I have included all the necessary ACPI components. I am
> using
> Winlogon. Do you know what I may be missing ?. XP Embedded worked just
> once
> and it stopped working. XP Pro is fine all the time.
>
> thanks
> SC
>
> "Schockal" wrote:
>
>> KM,
>>
>> It worked with Winlogon, do you know why Minlogon is not working ?. Is
>> there
>> a patch for the standby/resume problem for Minlogon ?. Please let me
>> know.
>>
>> thanks
>> SC
>>
>> "Schockal" wrote:
>>
>> > I am having problems coming out of standby mode. Windows XPE goes to
>> > standby
>> > mode when I pressed the "Standby" on bezel key of my display. Windows
>> > never
>> > responds when its in "standby".
>> >
>> > Do you know what could be the reason ?. My BIOS has some power settings
>> > S1,
>> > S3 and S1/S3. The current setting is S3, I also tried S1. It didn't
>> > make any
>> > difference.
>> >
>> > One thing I should mention is that it was working fine with XP Pro.
>> >
>> > Thanks
>> > SC
>

HI Sean,

Thanks for your response. I am not sure about #1. I am using a feature pack
from Kontron (ETX-PM Kontron SBC) for XP Embedded. It has all the necessary
components. So I believe the video driver is part of the package I got. I am
pretty sure that hibernation is not enabled, hibernation and standby ?. I
thought they were different. Let me enable it tomorrow and give it a try.

"Sean Liming (MVP)" wrote:

>
> 1. Do you have the video driver for your video card in the image?
> 2. Did you check to enable Hibernation in the ACPI computer component?
>
> Regards,
>
> Sean Liming
> www.sjjmicro.com / www.seanliming.com
> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
>
> "Schockal" <Schockal@discussions.microsoft.com> wrote in message
> news:CA2F5C20-C50F-4367-A71B-90F8C5890D78@microsoft.com...
> > Hi There,
> >
> > I had a post earlier about standby/resume functionality on XPE. I tested
> > this feature on XP Pro and it works fine. I couldn't make it work on XP
> > Embedded. I have all the ACPI components, I am using Winlogon. Are there
> > any
> > other components I am missing ?. Why is it working on XP Pro and not on
> > XPE
> > ?.
> >
> > I select Standby using the Start Menu (Turn Off Computer/Standby), the
> > system is getting into Standby mode without any problem, the issue is
> > waking
> > up. It won't wake up and I had to restart the machine.
> >
> > Any ideas why this is happening ?
> >
> > Thanks
> > SC
> >
> >
> > KM,
> >
> > I am having problems with Windows XP Embedded standby mode. Win XP Pro is
> > working fine. I have included all the necessary ACPI components. I am
> > using
> > Winlogon. Do you know what I may be missing ?. XP Embedded worked just
> > once
> > and it stopped working. XP Pro is fine all the time.
> >
> > thanks
> > SC
> >
> > "Schockal" wrote:
> >
> >> KM,
> >>
> >> It worked with Winlogon, do you know why Minlogon is not working ?. Is
> >> there
> >> a patch for the standby/resume problem for Minlogon ?. Please let me
> >> know.
> >>
> >> thanks
> >> SC
> >>
> >> "Schockal" wrote:
> >>
> >> > I am having problems coming out of standby mode. Windows XPE goes to
> >> > standby
> >> > mode when I pressed the "Standby" on bezel key of my display. Windows
> >> > never
> >> > responds when its in "standby".
> >> >
> >> > Do you know what could be the reason ?. My BIOS has some power settings
> >> > S1,
> >> > S3 and S1/S3. The current setting is S3, I also tried S1. It didn't
> >> > make any
> >> > difference.
> >> >
> >> > One thing I should mention is that it was working fine with XP Pro.
> >> >
> >> > Thanks
> >> > SC
> >
>

If you are not sure about the video, looking in Device Manager and see what
display adapter driver is loaded. If is is the standard VGA, then incorrect
driver is loaded.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit

"Schockal" <Schockal@discussions.microsoft.com> wrote in message
news:0CEE00DA-73BA-468A-B83A-649E46679665@microsoft.com...
> HI Sean,
>
> Thanks for your response. I am not sure about #1. I am using a feature
> pack
> from Kontron (ETX-PM Kontron SBC) for XP Embedded. It has all the
> necessary
> components. So I believe the video driver is part of the package I got. I
> am
> pretty sure that hibernation is not enabled, hibernation and standby ?. I
> thought they were different. Let me enable it tomorrow and give it a try.
>
> "Sean Liming (MVP)" wrote:
>
>>
>> 1. Do you have the video driver for your video card in the image?
>> 2. Did you check to enable Hibernation in the ACPI computer component?
>>
>> Regards,
>>
>> Sean Liming
>> www.sjjmicro.com / www.seanliming.com
>> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
>>
>> "Schockal" <Schockal@discussions.microsoft.com> wrote in message
>> news:CA2F5C20-C50F-4367-A71B-90F8C5890D78@microsoft.com...
>> > Hi There,
>> >
>> > I had a post earlier about standby/resume functionality on XPE. I
>> > tested
>> > this feature on XP Pro and it works fine. I couldn't make it work on XP
>> > Embedded. I have all the ACPI components, I am using Winlogon. Are
>> > there
>> > any
>> > other components I am missing ?. Why is it working on XP Pro and not on
>> > XPE
>> > ?.
>> >
>> > I select Standby using the Start Menu (Turn Off Computer/Standby), the
>> > system is getting into Standby mode without any problem, the issue is
>> > waking
>> > up. It won't wake up and I had to restart the machine.
>> >
>> > Any ideas why this is happening ?
>> >
>> > Thanks
>> > SC
>> >
>> >
>> > KM,
>> >
>> > I am having problems with Windows XP Embedded standby mode. Win XP Pro
>> > is
>> > working fine. I have included all the necessary ACPI components. I am
>> > using
>> > Winlogon. Do you know what I may be missing ?. XP Embedded worked just
>> > once
>> > and it stopped working. XP Pro is fine all the time.
>> >
>> > thanks
>> > SC
>> >
>> > "Schockal" wrote:
>> >
>> >> KM,
>> >>
>> >> It worked with Winlogon, do you know why Minlogon is not working ?. Is
>> >> there
>> >> a patch for the standby/resume problem for Minlogon ?. Please let me
>> >> know.
>> >>
>> >> thanks
>> >> SC
>> >>
>> >> "Schockal" wrote:
>> >>
>> >> > I am having problems coming out of standby mode. Windows XPE goes to
>> >> > standby
>> >> > mode when I pressed the "Standby" on bezel key of my display.
>> >> > Windows
>> >> > never
>> >> > responds when its in "standby".
>> >> >
>> >> > Do you know what could be the reason ?. My BIOS has some power
>> >> > settings
>> >> > S1,
>> >> > S3 and S1/S3. The current setting is S3, I also tried S1. It didn't
>> >> > make any
>> >> > difference.
>> >> >
>> >> > One thing I should mention is that it was working fine with XP Pro.
>> >> >
>> >> > Thanks
>> >> > SC
>> >
>>

Sean,

I checked it, Intel 82XXX something adapter is loaded. So I got the right
adapter, surprisingly it worked once, it went to standby and when I hit the
standby key again to wake up, it came back and restarted automatically. Do
you know why this is happening ?.

thanks
SC

"Sean Liming (MVP)" wrote:

>
> If you are not sure about the video, looking in Device Manager and see what
> display adapter driver is loaded. If is is the standard VGA, then incorrect
> driver is loaded.
>
> Regards,
>
> Sean Liming
> www.sjjmicro.com / www.seanliming.com
> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
>
> "Schockal" <Schockal@discussions.microsoft.com> wrote in message
> news:0CEE00DA-73BA-468A-B83A-649E46679665@microsoft.com...
> > HI Sean,
> >
> > Thanks for your response. I am not sure about #1. I am using a feature
> > pack
> > from Kontron (ETX-PM Kontron SBC) for XP Embedded. It has all the
> > necessary
> > components. So I believe the video driver is part of the package I got. I
> > am
> > pretty sure that hibernation is not enabled, hibernation and standby ?. I
> > thought they were different. Let me enable it tomorrow and give it a try.
> >
> > "Sean Liming (MVP)" wrote:
> >
> >>
> >> 1. Do you have the video driver for your video card in the image?
> >> 2. Did you check to enable Hibernation in the ACPI computer component?
> >>
> >> Regards,
> >>
> >> Sean Liming
> >> www.sjjmicro.com / www.seanliming.com
> >> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
> >>
> >> "Schockal" <Schockal@discussions.microsoft.com> wrote in message
> >> news:CA2F5C20-C50F-4367-A71B-90F8C5890D78@microsoft.com...
> >> > Hi There,
> >> >
> >> > I had a post earlier about standby/resume functionality on XPE. I
> >> > tested
> >> > this feature on XP Pro and it works fine. I couldn't make it work on XP
> >> > Embedded. I have all the ACPI components, I am using Winlogon. Are
> >> > there
> >> > any
> >> > other components I am missing ?. Why is it working on XP Pro and not on
> >> > XPE
> >> > ?.
> >> >
> >> > I select Standby using the Start Menu (Turn Off Computer/Standby), the
> >> > system is getting into Standby mode without any problem, the issue is
> >> > waking
> >> > up. It won't wake up and I had to restart the machine.
> >> >
> >> > Any ideas why this is happening ?
> >> >
> >> > Thanks
> >> > SC
> >> >
> >> >
> >> > KM,
> >> >
> >> > I am having problems with Windows XP Embedded standby mode. Win XP Pro
> >> > is
> >> > working fine. I have included all the necessary ACPI components. I am
> >> > using
> >> > Winlogon. Do you know what I may be missing ?. XP Embedded worked just
> >> > once
> >> > and it stopped working. XP Pro is fine all the time.
> >> >
> >> > thanks
> >> > SC
> >> >
> >> > "Schockal" wrote:
> >> >
> >> >> KM,
> >> >>
> >> >> It worked with Winlogon, do you know why Minlogon is not working ?. Is
> >> >> there
> >> >> a patch for the standby/resume problem for Minlogon ?. Please let me
> >> >> know.
> >> >>
> >> >> thanks
> >> >> SC
> >> >>
> >> >> "Schockal" wrote:
> >> >>
> >> >> > I am having problems coming out of standby mode. Windows XPE goes to
> >> >> > standby
> >> >> > mode when I pressed the "Standby" on bezel key of my display.
> >> >> > Windows
> >> >> > never
> >> >> > responds when its in "standby".
> >> >> >
> >> >> > Do you know what could be the reason ?. My BIOS has some power
> >> >> > settings
> >> >> > S1,
> >> >> > S3 and S1/S3. The current setting is S3, I also tried S1. It didn't
> >> >> > make any
> >> >> > difference.
> >> >> >
> >> >> > One thing I should mention is that it was working fine with XP Pro.
> >> >> >
> >> >> > Thanks
> >> >> > SC
> >> >
> >>
>

Sean,

Is there any way I could set the standby state (S1 or S3 or S1/S3) in Target
Designer ?.

Thanks
SC

"Sean Liming (MVP)" wrote:

>
> If you are not sure about the video, looking in Device Manager and see what
> display adapter driver is loaded. If is is the standard VGA, then incorrect
> driver is loaded.
>
> Regards,
>
> Sean Liming
> www.sjjmicro.com / www.seanliming.com
> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
>
> "Schockal" <Schockal@discussions.microsoft.com> wrote in message
> news:0CEE00DA-73BA-468A-B83A-649E46679665@microsoft.com...
> > HI Sean,
> >
> > Thanks for your response. I am not sure about #1. I am using a feature
> > pack
> > from Kontron (ETX-PM Kontron SBC) for XP Embedded. It has all the
> > necessary
> > components. So I believe the video driver is part of the package I got. I
> > am
> > pretty sure that hibernation is not enabled, hibernation and standby ?. I
> > thought they were different. Let me enable it tomorrow and give it a try.
> >
> > "Sean Liming (MVP)" wrote:
> >
> >>
> >> 1. Do you have the video driver for your video card in the image?
> >> 2. Did you check to enable Hibernation in the ACPI computer component?
> >>
> >> Regards,
> >>
> >> Sean Liming
> >> www.sjjmicro.com / www.seanliming.com
> >> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
> >>
> >> "Schockal" <Schockal@discussions.microsoft.com> wrote in message
> >> news:CA2F5C20-C50F-4367-A71B-90F8C5890D78@microsoft.com...
> >> > Hi There,
> >> >
> >> > I had a post earlier about standby/resume functionality on XPE. I
> >> > tested
> >> > this feature on XP Pro and it works fine. I couldn't make it work on XP
> >> > Embedded. I have all the ACPI components, I am using Winlogon. Are
> >> > there
> >> > any
> >> > other components I am missing ?. Why is it working on XP Pro and not on
> >> > XPE
> >> > ?.
> >> >
> >> > I select Standby using the Start Menu (Turn Off Computer/Standby), the
> >> > system is getting into Standby mode without any problem, the issue is
> >> > waking
> >> > up. It won't wake up and I had to restart the machine.
> >> >
> >> > Any ideas why this is happening ?
> >> >
> >> > Thanks
> >> > SC
> >> >
> >> >
> >> > KM,
> >> >
> >> > I am having problems with Windows XP Embedded standby mode. Win XP Pro
> >> > is
> >> > working fine. I have included all the necessary ACPI components. I am
> >> > using
> >> > Winlogon. Do you know what I may be missing ?. XP Embedded worked just
> >> > once
> >> > and it stopped working. XP Pro is fine all the time.
> >> >
> >> > thanks
> >> > SC
> >> >
> >> > "Schockal" wrote:
> >> >
> >> >> KM,
> >> >>
> >> >> It worked with Winlogon, do you know why Minlogon is not working ?. Is
> >> >> there
> >> >> a patch for the standby/resume problem for Minlogon ?. Please let me
> >> >> know.
> >> >>
> >> >> thanks
> >> >> SC
> >> >>
> >> >> "Schockal" wrote:
> >> >>
> >> >> > I am having problems coming out of standby mode. Windows XPE goes to
> >> >> > standby
> >> >> > mode when I pressed the "Standby" on bezel key of my display.
> >> >> > Windows
> >> >> > never
> >> >> > responds when its in "standby".
> >> >> >
> >> >> > Do you know what could be the reason ?. My BIOS has some power
> >> >> > settings
> >> >> > S1,
> >> >> > S3 and S1/S3. The current setting is S3, I also tried S1. It didn't
> >> >> > make any
> >> >> > difference.
> >> >> >
> >> >> > One thing I should mention is that it was working fine with XP Pro.
> >> >> >
> >> >> > Thanks
> >> >> > SC
> >> >
> >>
>

Not really, what is the Computer Component that is being used? Is it
Advanced Computer and Power Management interface. or one of the other
possible 6?

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit

"Schockal" <Schockal@discussions.microsoft.com> wrote in message
news:C4EEACB1-8197-43AF-8430-0213616B50FF@microsoft.com...
> Sean,
>
> Is there any way I could set the standby state (S1 or S3 or S1/S3) in
> Target
> Designer ?.
>
> Thanks
> SC
>
> "Sean Liming (MVP)" wrote:
>
>>
>> If you are not sure about the video, looking in Device Manager and see
>> what
>> display adapter driver is loaded. If is is the standard VGA, then
>> incorrect
>> driver is loaded.
>>
>> Regards,
>>
>> Sean Liming
>> www.sjjmicro.com / www.seanliming.com
>> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
>>
>> "Schockal" <Schockal@discussions.microsoft.com> wrote in message
>> news:0CEE00DA-73BA-468A-B83A-649E46679665@microsoft.com...
>> > HI Sean,
>> >
>> > Thanks for your response. I am not sure about #1. I am using a feature
>> > pack
>> > from Kontron (ETX-PM Kontron SBC) for XP Embedded. It has all the
>> > necessary
>> > components. So I believe the video driver is part of the package I got.
>> > I
>> > am
>> > pretty sure that hibernation is not enabled, hibernation and standby ?.
>> > I
>> > thought they were different. Let me enable it tomorrow and give it a
>> > try.
>> >
>> > "Sean Liming (MVP)" wrote:
>> >
>> >>
>> >> 1. Do you have the video driver for your video card in the image?
>> >> 2. Did you check to enable Hibernation in the ACPI computer component?
>> >>
>> >> Regards,
>> >>
>> >> Sean Liming
>> >> www.sjjmicro.com / www.seanliming.com
>> >> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
>> >>
>> >> "Schockal" <Schockal@discussions.microsoft.com> wrote in message
>> >> news:CA2F5C20-C50F-4367-A71B-90F8C5890D78@microsoft.com...
>> >> > Hi There,
>> >> >
>> >> > I had a post earlier about standby/resume functionality on XPE. I
>> >> > tested
>> >> > this feature on XP Pro and it works fine. I couldn't make it work on
>> >> > XP
>> >> > Embedded. I have all the ACPI components, I am using Winlogon. Are
>> >> > there
>> >> > any
>> >> > other components I am missing ?. Why is it working on XP Pro and not
>> >> > on
>> >> > XPE
>> >> > ?.
>> >> >
>> >> > I select Standby using the Start Menu (Turn Off Computer/Standby),
>> >> > the
>> >> > system is getting into Standby mode without any problem, the issue
>> >> > is
>> >> > waking
>> >> > up. It won't wake up and I had to restart the machine.
>> >> >
>> >> > Any ideas why this is happening ?
>> >> >
>> >> > Thanks
>> >> > SC
>> >> >
>> >> >
>> >> > KM,
>> >> >
>> >> > I am having problems with Windows XP Embedded standby mode. Win XP
>> >> > Pro
>> >> > is
>> >> > working fine. I have included all the necessary ACPI components. I
>> >> > am
>> >> > using
>> >> > Winlogon. Do you know what I may be missing ?. XP Embedded worked
>> >> > just
>> >> > once
>> >> > and it stopped working. XP Pro is fine all the time.
>> >> >
>> >> > thanks
>> >> > SC
>> >> >
>> >> > "Schockal" wrote:
>> >> >
>> >> >> KM,
>> >> >>
>> >> >> It worked with Winlogon, do you know why Minlogon is not working ?.
>> >> >> Is
>> >> >> there
>> >> >> a patch for the standby/resume problem for Minlogon ?. Please let
>> >> >> me
>> >> >> know.
>> >> >>
>> >> >> thanks
>> >> >> SC
>> >> >>
>> >> >> "Schockal" wrote:
>> >> >>
>> >> >> > I am having problems coming out of standby mode. Windows XPE goes
>> >> >> > to
>> >> >> > standby
>> >> >> > mode when I pressed the "Standby" on bezel key of my display.
>> >> >> > Windows
>> >> >> > never
>> >> >> > responds when its in "standby".
>> >> >> >
>> >> >> > Do you know what could be the reason ?. My BIOS has some power
>> >> >> > settings
>> >> >> > S1,
>> >> >> > S3 and S1/S3. The current setting is S3, I also tried S1. It
>> >> >> > didn't
>> >> >> > make any
>> >> >> > difference.
>> >> >> >
>> >> >> > One thing I should mention is that it was working fine with XP
>> >> >> > Pro.
>> >> >> >
>> >> >> > Thanks
>> >> >> > SC
>> >> >
>> >>
>>

Sean,

I use ACPI. I have two units one running XP Pro, the other XPE. I did a
quick Device Manager comparison. XPE was missing some components such as
Batteries (Microsoft AC Adapter, Microsoft System Management BIOS Driver). I
have added these two components and going to test now. Do you know why the
system management BIOS driver was missing in the first place ?. I thought
Target Designer is smart enough to pull it in but I had to add it manually.

Thanks
SC


"Sean Liming (MVP)" wrote:

>
> Not really, what is the Computer Component that is being used? Is it
> Advanced Computer and Power Management interface. or one of the other
> possible 6?
>
> Regards,
>
> Sean Liming
> www.sjjmicro.com / www.seanliming.com
> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
>
> "Schockal" <Schockal@discussions.microsoft.com> wrote in message
> news:C4EEACB1-8197-43AF-8430-0213616B50FF@microsoft.com...
> > Sean,
> >
> > Is there any way I could set the standby state (S1 or S3 or S1/S3) in
> > Target
> > Designer ?.
> >
> > Thanks
> > SC
> >
> > "Sean Liming (MVP)" wrote:
> >
> >>
> >> If you are not sure about the video, looking in Device Manager and see
> >> what
> >> display adapter driver is loaded. If is is the standard VGA, then
> >> incorrect
> >> driver is loaded.
> >>
> >> Regards,
> >>
> >> Sean Liming
> >> www.sjjmicro.com / www.seanliming.com
> >> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
> >>
> >> "Schockal" <Schockal@discussions.microsoft.com> wrote in message
> >> news:0CEE00DA-73BA-468A-B83A-649E46679665@microsoft.com...
> >> > HI Sean,
> >> >
> >> > Thanks for your response. I am not sure about #1. I am using a feature
> >> > pack
> >> > from Kontron (ETX-PM Kontron SBC) for XP Embedded. It has all the
> >> > necessary
> >> > components. So I believe the video driver is part of the package I got.
> >> > I
> >> > am
> >> > pretty sure that hibernation is not enabled, hibernation and standby ?.
> >> > I
> >> > thought they were different. Let me enable it tomorrow and give it a
> >> > try.
> >> >
> >> > "Sean Liming (MVP)" wrote:
> >> >
> >> >>
> >> >> 1. Do you have the video driver for your video card in the image?
> >> >> 2. Did you check to enable Hibernation in the ACPI computer component?
> >> >>
> >> >> Regards,
> >> >>
> >> >> Sean Liming
> >> >> www.sjjmicro.com / www.seanliming.com
> >> >> Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit
> >> >>
> >> >> "Schockal" <Schockal@discussions.microsoft.com> wrote in message
> >> >> news:CA2F5C20-C50F-4367-A71B-90F8C5890D78@microsoft.com...
> >> >> > Hi There,
> >> >> >
> >> >> > I had a post earlier about standby/resume functionality on XPE. I
> >> >> > tested
> >> >> > this feature on XP Pro and it works fine. I couldn't make it work on
> >> >> > XP
> >> >> > Embedded. I have all the ACPI components, I am using Winlogon. Are
> >> >> > there
> >> >> > any
> >> >> > other components I am missing ?. Why is it working on XP Pro and not
> >> >> > on
> >> >> > XPE
> >> >> > ?.
> >> >> >
> >> >> > I select Standby using the Start Menu (Turn Off Computer/Standby),
> >> >> > the
> >> >> > system is getting into Standby mode without any problem, the issue
> >> >> > is
> >> >> > waking
> >> >> > up. It won't wake up and I had to restart the machine.
> >> >> >
> >> >> > Any ideas why this is happening ?
> >> >> >
> >> >> > Thanks
> >> >> > SC
> >> >> >
> >> >> >
> >> >> > KM,
> >> >> >
> >> >> > I am having problems with Windows XP Embedded standby mode. Win XP
> >> >> > Pro
> >> >> > is
> >> >> > working fine. I have included all the necessary ACPI components. I
> >> >> > am
> >> >> > using
> >> >> > Winlogon. Do you know what I may be missing ?. XP Embedded worked
> >> >> > just
> >> >> > once
> >> >> > and it stopped working. XP Pro is fine all the time.
> >> >> >
> >> >> > thanks
> >> >> > SC
> >> >> >
> >> >> > "Schockal" wrote:
> >> >> >
> >> >> >> KM,
> >> >> >>
> >> >> >> It worked with Winlogon, do you know why Minlogon is not working ?.
> >> >> >> Is
> >> >> >> there
> >> >> >> a patch for the standby/resume problem for Minlogon ?. Please let
> >> >> >> me
> >> >> >> know.
> >> >> >>
> >> >> >> thanks
> >> >> >> SC
> >> >> >>
> >> >> >> "Schockal" wrote:
> >> >> >>
> >> >> >> > I am having problems coming out of standby mode. Windows XPE goes
> >> >> >> > to
> >> >> >> > standby
> >> >> >> > mode when I pressed the "Standby" on bezel key of my display.
> >> >> >> > Windows
> >> >> >> > never
> >> >> >> > responds when its in "standby".
> >> >> >> >
> >> >> >> > Do you know what could be the reason ?. My BIOS has some power
> >> >> >> > settings
> >> >> >> > S1,
> >> >> >> > S3 and S1/S3. The current setting is S3, I also tried S1. It
> >> >> >> > didn't
> >> >> >> > make any
> >> >> >> > difference.
> >> >> >> >
> >> >> >> > One thing I should mention is that it was working fine with XP
> >> >> >> > Pro.
> >> >> >> >
> >> >> >> > Thanks
> >> >> >> > SC
> >> >> >
> >> >>
> >>
>