Windows XP Community - XPHeads



Driver Scanner

sp3 and ftp command line

microsoft.public.windowsxp.general




Recommended Fix - Fix Vista Errors and Optimize Performance


Driver Scanner 2009 - Free Scan Now
Reply
  #1 (permalink)  
Old 05-14-2008, 02:53 PM
Bryan Z
 
Posts: n/a
sp3 and ftp command line
I just installed XP sp3 on a computer within our domain. Now, ftp from a
command line does not work. It connects, you can login, you can change
directories, you can rename and even delete files. But, if you try ls, dir,
get, or send, those commands timeout. After those commands timeout, the
connection remains open and you can still do the previous commands listed,
but not get,send,ls,dir. Just as a test, I opened the ftp site from within
IE and it works fine in there, I can copy and paste, rename, delete files.
Windows Firewall and ICS are both disabled.

Last Friday, I installed sp3 on my own workstation, and I do not have any of
these same problems. So, to further test it, I installed sp3 on another
computer. This third computer has the same problems with ftp that the first
one has.

And, something else that might be related... With a domain admin account, I
can pull up Computer Management for my computer remotely, but not the 2 that
have the ftp problems. And, this problem is usually fixed by disabling
Windows Firewall or configuring Windows Firewall to allow those type
connections.

The only difference between these 3 computers is that on mine, I used our
internal WSUS server to apply the service pack. The other 2 computers, I
downloaded the sp3 distribution, WindowsXP-KB936929-SP3-x86-ENU.exe, from
Microsoft and installed that. I didn't want to apply sp3 domain wide, so I
figured I'd just install it on a few computers first.

Any help would be much appreciated!!
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
  #2 (permalink)  
Old 05-14-2008, 03:37 PM
PA Bear [MS MVP]
 
Posts: n/a
Re: sp3 and ftp command line
Free unlimited installation and compatibility support is available for
Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat and
e-mail support is available only in the United States and Canada.

• US:
http://support.microsoft.com/oas/def...3&gprid=522131

• CA:
http://support.microsoft.com/oas/def...3&gprid=522131

• UK:
http://support.microsoft.com/oas/def...3&gprid=522131

• AU:
http://support.microsoft.com/oas/def...3&gprid=522131

• Other: http://support.microsoft.com/oas/def...spx?gprid=1173 | select
Windows XP | select Windows XP Service Pack 3
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/

Bryan Z wrote:
> I just installed XP sp3 on a computer within our domain. Now, ftp from a
> command line does not work. It connects, you can login, you can change
> directories, you can rename and even delete files. But, if you try ls,
> dir,
> get, or send, those commands timeout. After those commands timeout, the
> connection remains open and you can still do the previous commands listed,
> but not get,send,ls,dir. Just as a test, I opened the ftp site from
> within
> IE and it works fine in there, I can copy and paste, rename, delete files.
> Windows Firewall and ICS are both disabled.
>
> Last Friday, I installed sp3 on my own workstation, and I do not have any
> of
> these same problems. So, to further test it, I installed sp3 on another
> computer. This third computer has the same problems with ftp that the
> first
> one has.
>
> And, something else that might be related... With a domain admin account,
> I
> can pull up Computer Management for my computer remotely, but not the 2
> that
> have the ftp problems. And, this problem is usually fixed by disabling
> Windows Firewall or configuring Windows Firewall to allow those type
> connections.
>
> The only difference between these 3 computers is that on mine, I used our
> internal WSUS server to apply the service pack. The other 2 computers, I
> downloaded the sp3 distribution, WindowsXP-KB936929-SP3-x86-ENU.exe, from
> Microsoft and installed that. I didn't want to apply sp3 domain wide, so
> I
> figured I'd just install it on a few computers first.
>
> Any help would be much appreciated!!


Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 05-14-2008, 03:56 PM
Bryan Z
 
Posts: n/a
Re: sp3 and ftp command line
I tried the free support, but they said they cannot help with computers in a
domain...

"PA Bear [MS MVP]" wrote:

> Free unlimited installation and compatibility support is available for
> Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat and
> e-mail support is available only in the United States and Canada.
>
> • US:
> http://support.microsoft.com/oas/def...3&gprid=522131
>
> • CA:
> http://support.microsoft.com/oas/def...3&gprid=522131
>
> • UK:
> http://support.microsoft.com/oas/def...3&gprid=522131
>
> • AU:
> http://support.microsoft.com/oas/def...3&gprid=522131
>
> • Other: http://support.microsoft.com/oas/def...spx?gprid=1173 | select
> Windows XP | select Windows XP Service Pack 3
> --
> ~Robear Dyer (PA Bear)
> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
> AumHa VSOP & Admin http://aumha.net
> DTS-L http://dts-l.net/
>
> Bryan Z wrote:
> > I just installed XP sp3 on a computer within our domain. Now, ftp from a
> > command line does not work. It connects, you can login, you can change
> > directories, you can rename and even delete files. But, if you try ls,
> > dir,
> > get, or send, those commands timeout. After those commands timeout, the
> > connection remains open and you can still do the previous commands listed,
> > but not get,send,ls,dir. Just as a test, I opened the ftp site from
> > within
> > IE and it works fine in there, I can copy and paste, rename, delete files.
> > Windows Firewall and ICS are both disabled.
> >
> > Last Friday, I installed sp3 on my own workstation, and I do not have any
> > of
> > these same problems. So, to further test it, I installed sp3 on another
> > computer. This third computer has the same problems with ftp that the
> > first
> > one has.
> >
> > And, something else that might be related... With a domain admin account,
> > I
> > can pull up Computer Management for my computer remotely, but not the 2
> > that
> > have the ftp problems. And, this problem is usually fixed by disabling
> > Windows Firewall or configuring Windows Firewall to allow those type
> > connections.
> >
> > The only difference between these 3 computers is that on mine, I used our
> > internal WSUS server to apply the service pack. The other 2 computers, I
> > downloaded the sp3 distribution, WindowsXP-KB936929-SP3-x86-ENU.exe, from
> > Microsoft and installed that. I didn't want to apply sp3 domain wide, so
> > I
> > figured I'd just install it on a few computers first.
> >
> > Any help would be much appreciated!!

>
>

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old 05-14-2008, 04:06 PM
PA Bear [MS MVP]
 
Posts: n/a
Re: sp3 and ftp command line
For enterprise customers, support is available through your usual support
contacts.

Bryan Z wrote:
> I tried the free support, but they said they cannot help with computers in
> a
> domain...
>
> "PA Bear [MS MVP]" wrote:
>
>> Free unlimited installation and compatibility support is available for
>> Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat and
>> e-mail support is available only in the United States and Canada.
>>
>> • US:
>> http://support.microsoft.com/oas/def...3&gprid=522131
>>
>> • CA:
>> http://support.microsoft.com/oas/def...3&gprid=522131
>>
>> • UK:
>> http://support.microsoft.com/oas/def...3&gprid=522131
>>
>> • AU:
>> http://support.microsoft.com/oas/def...3&gprid=522131
>>
>> • Other: http://support.microsoft.com/oas/def...spx?gprid=1173 |
>> select
>> Windows XP | select Windows XP Service Pack 3
>> --
>> ~Robear Dyer (PA Bear)
>> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
>> AumHa VSOP & Admin http://aumha.net
>> DTS-L http://dts-l.net/
>>
>> Bryan Z wrote:
>>> I just installed XP sp3 on a computer within our domain. Now, ftp from
>>> a
>>> command line does not work. It connects, you can login, you can change
>>> directories, you can rename and even delete files. But, if you try ls,
>>> dir,
>>> get, or send, those commands timeout. After those commands timeout, the
>>> connection remains open and you can still do the previous commands
>>> listed,
>>> but not get,send,ls,dir. Just as a test, I opened the ftp site from
>>> within
>>> IE and it works fine in there, I can copy and paste, rename, delete
>>> files.
>>> Windows Firewall and ICS are both disabled.
>>>
>>> Last Friday, I installed sp3 on my own workstation, and I do not have
>>> any
>>> of
>>> these same problems. So, to further test it, I installed sp3 on another
>>> computer. This third computer has the same problems with ftp that the
>>> first
>>> one has.
>>>
>>> And, something else that might be related... With a domain admin
>>> account,
>>> I
>>> can pull up Computer Management for my computer remotely, but not the 2
>>> that
>>> have the ftp problems. And, this problem is usually fixed by disabling
>>> Windows Firewall or configuring Windows Firewall to allow those type
>>> connections.
>>>
>>> The only difference between these 3 computers is that on mine, I used
>>> our
>>> internal WSUS server to apply the service pack. The other 2 computers,
>>> I
>>> downloaded the sp3 distribution, WindowsXP-KB936929-SP3-x86-ENU.exe,
>>> from
>>> Microsoft and installed that. I didn't want to apply sp3 domain wide,
>>> so
>>> I
>>> figured I'd just install it on a few computers first.
>>>
>>> Any help would be much appreciated!!


Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old 05-14-2008, 04:35 PM
Bryan Z
 
Posts: n/a
Re: sp3 and ftp command line
This is one of my usual support contacts... this and the knowledge base

Hopefully, someone here might know of something to check or try

"PA Bear [MS MVP]" wrote:

> For enterprise customers, support is available through your usual support
> contacts.
>
> Bryan Z wrote:
> > I tried the free support, but they said they cannot help with computers in
> > a
> > domain...
> >
> > "PA Bear [MS MVP]" wrote:
> >
> >> Free unlimited installation and compatibility support is available for
> >> Windows XP, but only for Service Pack 3 (SP3), until 14 Apr-09. Chat and
> >> e-mail support is available only in the United States and Canada.
> >>
> >> • US:
> >> http://support.microsoft.com/oas/def...3&gprid=522131
> >>
> >> • CA:
> >> http://support.microsoft.com/oas/def...3&gprid=522131
> >>
> >> • UK:
> >> http://support.microsoft.com/oas/def...3&gprid=522131
> >>
> >> • AU:
> >> http://support.microsoft.com/oas/def...3&gprid=522131
> >>
> >> • Other: http://support.microsoft.com/oas/def...spx?gprid=1173 |
> >> select
> >> Windows XP | select Windows XP Service Pack 3
> >> --
> >> ~Robear Dyer (PA Bear)
> >> MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
> >> AumHa VSOP & Admin http://aumha.net
> >> DTS-L http://dts-l.net/
> >>
> >> Bryan Z wrote:
> >>> I just installed XP sp3 on a computer within our domain. Now, ftp from
> >>> a
> >>> command line does not work. It connects, you can login, you can change
> >>> directories, you can rename and even delete files. But, if you try ls,
> >>> dir,
> >>> get, or send, those commands timeout. After those commands timeout, the
> >>> connection remains open and you can still do the previous commands
> >>> listed,
> >>> but not get,send,ls,dir. Just as a test, I opened the ftp site from
> >>> within
> >>> IE and it works fine in there, I can copy and paste, rename, delete
> >>> files.
> >>> Windows Firewall and ICS are both disabled.
> >>>
> >>> Last Friday, I installed sp3 on my own workstation, and I do not have
> >>> any
> >>> of
> >>> these same problems. So, to further test it, I installed sp3 on another
> >>> computer. This third computer has the same problems with ftp that the
> >>> first
> >>> one has.
> >>>
> >>> And, something else that might be related... With a domain admin
> >>> account,
> >>> I
> >>> can pull up Computer Management for my computer remotely, but not the 2
> >>> that
> >>> have the ftp problems. And, this problem is usually fixed by disabling
> >>> Windows Firewall or configuring Windows Firewall to allow those type
> >>> connections.
> >>>
> >>> The only difference between these 3 computers is that on mine, I used
> >>> our
> >>> internal WSUS server to apply the service pack. The other 2 computers,
> >>> I
> >>> downloaded the sp3 distribution, WindowsXP-KB936929-SP3-x86-ENU.exe,
> >>> from
> >>> Microsoft and installed that. I didn't want to apply sp3 domain wide,
> >>> so
> >>> I
> >>> figured I'd just install it on a few computers first.
> >>>
> >>> Any help would be much appreciated!!

>
>

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old 05-14-2008, 06:45 PM
Big Al
 
Posts: n/a
Re: sp3 and ftp command line
Bryan Z wrote:
> I just installed XP sp3 on a computer within our domain. Now, ftp from a
> command line does not work. It connects, you can login, you can change
> directories, you can rename and even delete files. But, if you try ls, dir,
> get, or send, those commands timeout. After those commands timeout, the
> connection remains open and you can still do the previous commands listed,
> but not get,send,ls,dir. Just as a test, I opened the ftp site from within
> IE and it works fine in there, I can copy and paste, rename, delete files.
> Windows Firewall and ICS are both disabled.
>
> Last Friday, I installed sp3 on my own workstation, and I do not have any of
> these same problems. So, to further test it, I installed sp3 on another
> computer. This third computer has the same problems with ftp that the first
> one has.
>
> And, something else that might be related... With a domain admin account, I
> can pull up Computer Management for my computer remotely, but not the 2 that
> have the ftp problems. And, this problem is usually fixed by disabling
> Windows Firewall or configuring Windows Firewall to allow those type
> connections.
>
> The only difference between these 3 computers is that on mine, I used our
> internal WSUS server to apply the service pack. The other 2 computers, I
> downloaded the sp3 distribution, WindowsXP-KB936929-SP3-x86-ENU.exe, from
> Microsoft and installed that. I didn't want to apply sp3 domain wide, so I
> figured I'd just install it on a few computers first.
>
> Any help would be much appreciated!!

Its a gamble but download moveitfreely. It will install a windows look
a like ftps.exe program. Its both a 'secure ftp', and a bit more
advanced version of windows' ftp.exe. If you know the command line,
try ftps and just as a gamble try entering a passive command and then
doing your ls/dir commands. If that fails, do another passive command
and then your ls/dir commands. Passive turns on/off the
passive/active mode. You can't do this in the native windows ftp.
I've found it a firewall issue and I can't figure it out but it just works.
Again, its a gamble.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old 06-08-2010, 04:00 PM
undisclosed
 
Posts: n/a
Re: sp3 and ftp command line

Bryan, I am having this same issue as you have decribed below. Were you
ever able to get this resolved and if show could kindly share the
solution. Thanks.

Joel


Bryan Z;1019244 Wrote:
> I just installed XP sp3 on a computer within our domain. Now, ftp from a
> command line does not work. It connects, you can login, you can change
> directories, you can rename and even delete files. But, if you try ls,
> dir,
> get, or send, those commands timeout. After those commands timeout, the
> connection remains open and you can still do the previous commands
> listed,
> but not get,send,ls,dir. Just as a test, I opened the ftp site from
> within
> IE and it works fine in there, I can copy and paste, rename, delete
> files.
> Windows Firewall and ICS are both disabled.
>
> Last Friday, I installed sp3 on my own workstation, and I do not have
> any of
> these same problems. So, to further test it, I installed sp3 on another
> computer. This third computer has the same problems with ftp that the
> first
> one has.
>
> And, something else that might be related... With a domain admin
> account, I
> can pull up Computer Management for my computer remotely, but not the 2
> that
> have the ftp problems. And, this problem is usually fixed by disabling
> Windows Firewall or configuring Windows Firewall to allow those type
> connections.
>
> The only difference between these 3 computers is that on mine, I used
> our
> internal WSUS server to apply the service pack. The other 2 computers,
> I
> downloaded the sp3 distribution, WindowsXP-KB936929-SP3-x86-ENU.exe,
> from
> Microsoft and installed that. I didn't want to apply sp3 domain wide,
> so I
> figured I'd just install it on a few computers first.
>
> Any help would be much appreciated!!



--
JoDaHaII
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old 06-08-2010, 06:03 PM
Pegasus [MVP]
 
Posts: n/a
Re: sp3 and ftp command line


"undisclosed" wrote in message
news:ced82e1308ab6314b3ef3c15252397b4@nntp-gateway.com...
>
> Bryan, I am having this same issue as you have decribed below. Were you
> ever able to get this resolved and if show could kindly share the
> solution. Thanks.
>
> Joel


Bryan posted his question more than two years ago. I doubt that he is still
around.

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 09:36 PM.




Recommended Download



Design by Vjacheslav Trushkin for phpBBStyles.com.
Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.1.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74