reboot failure from windows xp cd

Help All,

After my computer was stuck in a loop i rebooted from the Windows XP cd. I
then went to Windows updates and downloaded all the updates. I then tried to
install SP2 but was greeted with an "access denied" message. I followed
various replies posted on these fourums to remedy this but it did not work.
I then rebooted again from the cd and now i have lost access to Windows
Updates.

On the 1st occasion i have tried using a different admin account,
unistalling my Panda antivirus and i have tried to follow instructions to use
a SubInAcl file, this i am out of my depth.

On the 2nd occasion i believe i have lost a jscript.dll file but again i
have encountered confiedence problems trying to fix this.

Any ideas anyone?

I would guess from what was in your post that you ran setup and installed a
fresh copy of the system, and failed to 'activate' it yet. This would lead
to a failure to update to SP2 from the updates site, because activation is
required to do that.
To run the activation dialog, go to start/run, and type:
%SYSTEMROOT%\system32\oobe\msoobe.exe /A
--
Was this helpful? Then click the Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales...eAPostAsAnswer
Mark L. Ferguson
..

"Chonx" <Chonx@discussions.microsoft.com> wrote in message
news:84010DDC-CB7B-4EFD-BB82-710C9BC9274C@microsoft.com...
> Help All,
>
> After my computer was stuck in a loop i rebooted from the Windows XP cd.
> I
> then went to Windows updates and downloaded all the updates. I then tried
> to
> install SP2 but was greeted with an "access denied" message. I followed
> various replies posted on these fourums to remedy this but it did not
> work.
> I then rebooted again from the cd and now i have lost access to Windows
> Updates.
>
> On the 1st occasion i have tried using a different admin account,
> unistalling my Panda antivirus and i have tried to follow instructions to
> use
> a SubInAcl file, this i am out of my depth.
>
> On the 2nd occasion i believe i have lost a jscript.dll file but again i
> have encountered confiedence problems trying to fix this.
>
> Any ideas anyone?

Hi Mark,

I've typed that in but my computer would not accept the /A at the end "could
not find the specified file". I tried it without the /A and nothing happened?

Thanks

"Mark L. Ferguson" wrote:

> I would guess from what was in your post that you ran setup and installed a
> fresh copy of the system, and failed to 'activate' it yet. This would lead
> to a failure to update to SP2 from the updates site, because activation is
> required to do that.
> To run the activation dialog, go to start/run, and type:
> %SYSTEMROOT%\system32\oobe\msoobe.exe /A
> --
> Was this helpful? Then click the Ratings button. Voting helps the web
> interface.
> http://www.microsoft.com/wn3/locales...eAPostAsAnswer
> Mark L. Ferguson
> .
>
> "Chonx" <Chonx@discussions.microsoft.com> wrote in message
> news:84010DDC-CB7B-4EFD-BB82-710C9BC9274C@microsoft.com...
> > Help All,
> >
> > After my computer was stuck in a loop i rebooted from the Windows XP cd.
> > I
> > then went to Windows updates and downloaded all the updates. I then tried
> > to
> > install SP2 but was greeted with an "access denied" message. I followed
> > various replies posted on these fourums to remedy this but it did not
> > work.
> > I then rebooted again from the cd and now i have lost access to Windows
> > Updates.
> >
> > On the 1st occasion i have tried using a different admin account,
> > unistalling my Panda antivirus and i have tried to follow instructions to
> > use
> > a SubInAcl file, this i am out of my depth.
> >
> > On the 2nd occasion i believe i have lost a jscript.dll file but again i
> > have encountered confiedence problems trying to fix this.
> >
> > Any ideas anyone?
>

You probably missed putting a space before the /A

--
Was this helpful? Then click the Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales...eAPostAsAnswer
Mark L. Ferguson
..

"Chonx" <Chonx@discussions.microsoft.com> wrote in message
news:5FA0C01D-2364-4CF8-B137-8A35835CAEFE@microsoft.com...
> Hi Mark,
>
> I've typed that in but my computer would not accept the /A at the end
> "could
> not find the specified file". I tried it without the /A and nothing
> happened?
>
> Thanks
>
> "Mark L. Ferguson" wrote:
>
>> I would guess from what was in your post that you ran setup and installed
>> a
>> fresh copy of the system, and failed to 'activate' it yet. This would
>> lead
>> to a failure to update to SP2 from the updates site, because activation
>> is
>> required to do that.
>> To run the activation dialog, go to start/run, and type:
>> %SYSTEMROOT%\system32\oobe\msoobe.exe /A
>> --
>> Was this helpful? Then click the Ratings button. Voting helps the web
>> interface.
>> http://www.microsoft.com/wn3/locales...eAPostAsAnswer
>> Mark L. Ferguson
>> .
>>
>> "Chonx" <Chonx@discussions.microsoft.com> wrote in message
>> news:84010DDC-CB7B-4EFD-BB82-710C9BC9274C@microsoft.com...
>> > Help All,
>> >
>> > After my computer was stuck in a loop i rebooted from the Windows XP
>> > cd.
>> > I
>> > then went to Windows updates and downloaded all the updates. I then
>> > tried
>> > to
>> > install SP2 but was greeted with an "access denied" message. I
>> > followed
>> > various replies posted on these fourums to remedy this but it did not
>> > work.
>> > I then rebooted again from the cd and now i have lost access to Windows
>> > Updates.
>> >
>> > On the 1st occasion i have tried using a different admin account,
>> > unistalling my Panda antivirus and i have tried to follow instructions
>> > to
>> > use
>> > a SubInAcl file, this i am out of my depth.
>> >
>> > On the 2nd occasion i believe i have lost a jscript.dll file but again
>> > i
>> > have encountered confiedence problems trying to fix this.
>> >
>> > Any ideas anyone?
>>

Yeah i did miss the space but when i typed it in correctly it said Windows is
already activated.

"Mark L. Ferguson" wrote:

> You probably missed putting a space before the /A
>
> --
> Was this helpful? Then click the Ratings button. Voting helps the web
> interface.
> http://www.microsoft.com/wn3/locales...eAPostAsAnswer
> Mark L. Ferguson
> .
>
> "Chonx" <Chonx@discussions.microsoft.com> wrote in message
> news:5FA0C01D-2364-4CF8-B137-8A35835CAEFE@microsoft.com...
> > Hi Mark,
> >
> > I've typed that in but my computer would not accept the /A at the end
> > "could
> > not find the specified file". I tried it without the /A and nothing
> > happened?
> >
> > Thanks
> >
> > "Mark L. Ferguson" wrote:
> >
> >> I would guess from what was in your post that you ran setup and installed
> >> a
> >> fresh copy of the system, and failed to 'activate' it yet. This would
> >> lead
> >> to a failure to update to SP2 from the updates site, because activation
> >> is
> >> required to do that.
> >> To run the activation dialog, go to start/run, and type:
> >> %SYSTEMROOT%\system32\oobe\msoobe.exe /A
> >> --
> >> Was this helpful? Then click the Ratings button. Voting helps the web
> >> interface.
> >> http://www.microsoft.com/wn3/locales...eAPostAsAnswer
> >> Mark L. Ferguson
> >> .
> >>
> >> "Chonx" <Chonx@discussions.microsoft.com> wrote in message
> >> news:84010DDC-CB7B-4EFD-BB82-710C9BC9274C@microsoft.com...
> >> > Help All,
> >> >
> >> > After my computer was stuck in a loop i rebooted from the Windows XP
> >> > cd.
> >> > I
> >> > then went to Windows updates and downloaded all the updates. I then
> >> > tried
> >> > to
> >> > install SP2 but was greeted with an "access denied" message. I
> >> > followed
> >> > various replies posted on these fourums to remedy this but it did not
> >> > work.
> >> > I then rebooted again from the cd and now i have lost access to Windows
> >> > Updates.
> >> >
> >> > On the 1st occasion i have tried using a different admin account,
> >> > unistalling my Panda antivirus and i have tried to follow instructions
> >> > to
> >> > use
> >> > a SubInAcl file, this i am out of my depth.
> >> >
> >> > On the 2nd occasion i believe i have lost a jscript.dll file but again
> >> > i
> >> > have encountered confiedence problems trying to fix this.
> >> >
> >> > Any ideas anyone?
> >>

You can try putting the update site in your trusted zone, and/or lowering
the Security setting in the browser Options

--
Was this helpful? Then click the Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales...eAPostAsAnswer
Mark L. Ferguson
..

"Chonx" <Chonx@discussions.microsoft.com> wrote in message
news:E80F32A6-6DEC-406F-A910-5B9844D7C387@microsoft.com...
> Yeah i did miss the space but when i typed it in correctly it said Windows
> is
> already activated.
>
> "Mark L. Ferguson" wrote:
>
>> You probably missed putting a space before the /A
>>
>> --
>> Was this helpful? Then click the Ratings button. Voting helps the web
>> interface.
>> http://www.microsoft.com/wn3/locales...eAPostAsAnswer
>> Mark L. Ferguson
>> .
>>
>> "Chonx" <Chonx@discussions.microsoft.com> wrote in message
>> news:5FA0C01D-2364-4CF8-B137-8A35835CAEFE@microsoft.com...
>> > Hi Mark,
>> >
>> > I've typed that in but my computer would not accept the /A at the end
>> > "could
>> > not find the specified file". I tried it without the /A and nothing
>> > happened?
>> >
>> > Thanks
>> >
>> > "Mark L. Ferguson" wrote:
>> >
>> >> I would guess from what was in your post that you ran setup and
>> >> installed
>> >> a
>> >> fresh copy of the system, and failed to 'activate' it yet. This would
>> >> lead
>> >> to a failure to update to SP2 from the updates site, because
>> >> activation
>> >> is
>> >> required to do that.
>> >> To run the activation dialog, go to start/run, and type:
>> >> %SYSTEMROOT%\system32\oobe\msoobe.exe /A
>> >> --
>> >> Was this helpful? Then click the Ratings button. Voting helps the web
>> >> interface.
>> >> http://www.microsoft.com/wn3/locales...eAPostAsAnswer
>> >> Mark L. Ferguson
>> >> .
>> >>
>> >> "Chonx" <Chonx@discussions.microsoft.com> wrote in message
>> >> news:84010DDC-CB7B-4EFD-BB82-710C9BC9274C@microsoft.com...
>> >> > Help All,
>> >> >
>> >> > After my computer was stuck in a loop i rebooted from the Windows XP
>> >> > cd.
>> >> > I
>> >> > then went to Windows updates and downloaded all the updates. I then
>> >> > tried
>> >> > to
>> >> > install SP2 but was greeted with an "access denied" message. I
>> >> > followed
>> >> > various replies posted on these fourums to remedy this but it did
>> >> > not
>> >> > work.
>> >> > I then rebooted again from the cd and now i have lost access to
>> >> > Windows
>> >> > Updates.
>> >> >
>> >> > On the 1st occasion i have tried using a different admin account,
>> >> > unistalling my Panda antivirus and i have tried to follow
>> >> > instructions
>> >> > to
>> >> > use
>> >> > a SubInAcl file, this i am out of my depth.
>> >> >
>> >> > On the 2nd occasion i believe i have lost a jscript.dll file but
>> >> > again
>> >> > i
>> >> > have encountered confiedence problems trying to fix this.
>> >> >
>> >> > Any ideas anyone?
>> >>

"Chonx" wrote:

> Help All,
>
> After my computer was stuck in a loop i rebooted from the Windows XP cd. I
> then went to Windows updates and downloaded all the updates. I then tried to
> install SP2 but was greeted with an "access denied" message. I followed
> various replies posted on these fourums to remedy this but it did not work.
> I then rebooted again from the cd and now i have lost access to Windows
> Updates.
>
> On the 1st occasion i have tried using a different admin account,
> unistalling my Panda antivirus and i have tried to follow instructions to use
> a SubInAcl file, this i am out of my depth.
>
> On the 2nd occasion i believe i have lost a jscript.dll file but again i
> have encountered confiedence problems trying to fix this.
>
> Any ideas anyone?

Are you having problem to update or Activate?.

Updates are not installed successfully from Windows Update, from Microsoft
Update, or by using Automatic Updates after you repair a Windows XP
installation
http://support.microsoft.com/kb/943144

You cannot install some updates or programs: Go to:
http://support.microsoft.com/default...&Product=winxp
You may receive an "Error 0x80072EE2," "Error 0x80072EE7," "Error
0x80072EFD," "Error 0x80072F76," or "Error 0x80072F78" error message when you
try to use the Windows Update Web site or the Microsoft Update Web site
http://support.microsoft.com/kb/836941

Please copy and paste the following into a Notepad and Save it as Reg.bat on
your Desktop then double click the Reg.bat to execute it and click "YES" to
register the Required DLLs for the windows updates engine.

regsvr32 Msxml.dll
regsvr32 Msxml2.dll
regsvr32 atl.dll
regsvr32 wuapi.dll
regsvr32 inetcomm.dll
regsvr32 wups.dll
regsvr32 wuaueng.dll
regsvr32 wucltui.dll
regsvr32 wuweb.dll
regsvr32 MSXML3.dll
regsvr32 cryptsvc.dll
regsvr32 dssenh.dll
regsvr32 qmgr.dll
regsvr32 wuapi.dll
regsvr32 oleaut32.dll
regsvr32 qmgrprxy.dll
regsvr32 wups2.dll
regsvr32 jscript.dll
net start wuauserv


Reboot the machine and see if you will be able to get and install any updates.


Dial-a-fix
http://wiki.djlizard.net/Dial-a-fix
HTH.
nass
----
http://www.nasstec.co.uk

Thanks I can now access updates. When i try to install sp2 I get the
following message, "sp2 setup could not backup registry key
HKLM\Software\Microsoft\Windows\CurrentVersion\Uni nstall\KB835409 to file
C:\Windows\$NtServicePackUninstall$\reg01610. 5:Access is denied"

"Mark L. Ferguson" wrote:

> You can try putting the update site in your trusted zone, and/or lowering
> the Security setting in the browser Options
>
> --
> Was this helpful? Then click the Ratings button. Voting helps the web
> interface.
> http://www.microsoft.com/wn3/locales...eAPostAsAnswer
> Mark L. Ferguson
> .
>
> "Chonx" <Chonx@discussions.microsoft.com> wrote in message
> news:E80F32A6-6DEC-406F-A910-5B9844D7C387@microsoft.com...
> > Yeah i did miss the space but when i typed it in correctly it said Windows
> > is
> > already activated.
> >
> > "Mark L. Ferguson" wrote:
> >
> >> You probably missed putting a space before the /A
> >>
> >> --
> >> Was this helpful? Then click the Ratings button. Voting helps the web
> >> interface.
> >> http://www.microsoft.com/wn3/locales...eAPostAsAnswer
> >> Mark L. Ferguson
> >> .
> >>
> >> "Chonx" <Chonx@discussions.microsoft.com> wrote in message
> >> news:5FA0C01D-2364-4CF8-B137-8A35835CAEFE@microsoft.com...
> >> > Hi Mark,
> >> >
> >> > I've typed that in but my computer would not accept the /A at the end
> >> > "could
> >> > not find the specified file". I tried it without the /A and nothing
> >> > happened?
> >> >
> >> > Thanks
> >> >
> >> > "Mark L. Ferguson" wrote:
> >> >
> >> >> I would guess from what was in your post that you ran setup and
> >> >> installed
> >> >> a
> >> >> fresh copy of the system, and failed to 'activate' it yet. This would
> >> >> lead
> >> >> to a failure to update to SP2 from the updates site, because
> >> >> activation
> >> >> is
> >> >> required to do that.
> >> >> To run the activation dialog, go to start/run, and type:
> >> >> %SYSTEMROOT%\system32\oobe\msoobe.exe /A
> >> >> --
> >> >> Was this helpful? Then click the Ratings button. Voting helps the web
> >> >> interface.
> >> >> http://www.microsoft.com/wn3/locales...eAPostAsAnswer
> >> >> Mark L. Ferguson
> >> >> .
> >> >>
> >> >> "Chonx" <Chonx@discussions.microsoft.com> wrote in message
> >> >> news:84010DDC-CB7B-4EFD-BB82-710C9BC9274C@microsoft.com...
> >> >> > Help All,
> >> >> >
> >> >> > After my computer was stuck in a loop i rebooted from the Windows XP
> >> >> > cd.
> >> >> > I
> >> >> > then went to Windows updates and downloaded all the updates. I then
> >> >> > tried
> >> >> > to
> >> >> > install SP2 but was greeted with an "access denied" message. I
> >> >> > followed
> >> >> > various replies posted on these fourums to remedy this but it did
> >> >> > not
> >> >> > work.
> >> >> > I then rebooted again from the cd and now i have lost access to
> >> >> > Windows
> >> >> > Updates.
> >> >> >
> >> >> > On the 1st occasion i have tried using a different admin account,
> >> >> > unistalling my Panda antivirus and i have tried to follow
> >> >> > instructions
> >> >> > to
> >> >> > use
> >> >> > a SubInAcl file, this i am out of my depth.
> >> >> >
> >> >> > On the 2nd occasion i believe i have lost a jscript.dll file but
> >> >> > again
> >> >> > i
> >> >> > have encountered confiedence problems trying to fix this.
> >> >> >
> >> >> > Any ideas anyone?
> >> >>

Thanks for the help.

This is were i am. I have rebooted from a Xp Oem cd with sp1. I cannot
update my computer with service pack 2. I keep getting an access denied
message whilst SP2 setup wizard is trying to back up the Registry whilst
installing. Any of the fixes I find on MS.com will not install as i get a
"access denied" message.

Ta

"nass" wrote:

>
>
> "Chonx" wrote:
>
> > Help All,
> >
> > After my computer was stuck in a loop i rebooted from the Windows XP cd. I
> > then went to Windows updates and downloaded all the updates. I then tried to
> > install SP2 but was greeted with an "access denied" message. I followed
> > various replies posted on these fourums to remedy this but it did not work.
> > I then rebooted again from the cd and now i have lost access to Windows
> > Updates.
> >
> > On the 1st occasion i have tried using a different admin account,
> > unistalling my Panda antivirus and i have tried to follow instructions to use
> > a SubInAcl file, this i am out of my depth.
> >
> > On the 2nd occasion i believe i have lost a jscript.dll file but again i
> > have encountered confiedence problems trying to fix this.
> >
> > Any ideas anyone?
>
> Are you having problem to update or Activate?.
>
> Updates are not installed successfully from Windows Update, from Microsoft
> Update, or by using Automatic Updates after you repair a Windows XP
> installation
> http://support.microsoft.com/kb/943144
>
> You cannot install some updates or programs: Go to:
> http://support.microsoft.com/default...&Product=winxp
> You may receive an "Error 0x80072EE2," "Error 0x80072EE7," "Error
> 0x80072EFD," "Error 0x80072F76," or "Error 0x80072F78" error message when you
> try to use the Windows Update Web site or the Microsoft Update Web site
> http://support.microsoft.com/kb/836941
>
> Please copy and paste the following into a Notepad and Save it as Reg.bat on
> your Desktop then double click the Reg.bat to execute it and click "YES" to
> register the Required DLLs for the windows updates engine.
>
> regsvr32 Msxml.dll
> regsvr32 Msxml2.dll
> regsvr32 atl.dll
> regsvr32 wuapi.dll
> regsvr32 inetcomm.dll
> regsvr32 wups.dll
> regsvr32 wuaueng.dll
> regsvr32 wucltui.dll
> regsvr32 wuweb.dll
> regsvr32 MSXML3.dll
> regsvr32 cryptsvc.dll
> regsvr32 dssenh.dll
> regsvr32 qmgr.dll
> regsvr32 wuapi.dll
> regsvr32 oleaut32.dll
> regsvr32 qmgrprxy.dll
> regsvr32 wups2.dll
> regsvr32 jscript.dll
> net start wuauserv
>
>
> Reboot the machine and see if you will be able to get and install any updates.
>
>
> Dial-a-fix
> http://wiki.djlizard.net/Dial-a-fix
> HTH.
> nass
> ----
> http://www.nasstec.co.uk
>

You are seeing registry Permissions errors. I would try this fix:

Aaron Stebner's WebLog Solving setup errors by using the SubInACL tool to
repair file and registry permissions:
http://blogs.msdn.com/astebner/archi...04/739820.aspx

--
Was this helpful? Then click the Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales...eAPostAsAnswer
Mark L. Ferguson
..

"Chonx" <Chonx@discussions.microsoft.com> wrote in message
news:413F87F1-1B09-4F8A-A46D-749C651FB071@microsoft.com...
> Thanks I can now access updates. When i try to install sp2 I get the
> following message, "sp2 setup could not backup registry key
> HKLM\Software\Microsoft\Windows\CurrentVersion\Uni nstall\KB835409 to file
> C:\Windows\$NtServicePackUninstall$\reg01610. 5:Access is denied"
>
> "Mark L. Ferguson" wrote:
>
>> You can try putting the update site in your trusted zone, and/or lowering
>> the Security setting in the browser Options
>>
>> --
>> Was this helpful? Then click the Ratings button. Voting helps the web
>> interface.
>> http://www.microsoft.com/wn3/locales...eAPostAsAnswer
>> Mark L. Ferguson
>> .
>>
>> "Chonx" <Chonx@discussions.microsoft.com> wrote in message
>> news:E80F32A6-6DEC-406F-A910-5B9844D7C387@microsoft.com...
>> > Yeah i did miss the space but when i typed it in correctly it said
>> > Windows
>> > is
>> > already activated.
>> >
>> > "Mark L. Ferguson" wrote:
>> >
>> >> You probably missed putting a space before the /A
>> >>
>> >> --
>> >> Was this helpful? Then click the Ratings button. Voting helps the web
>> >> interface.
>> >> http://www.microsoft.com/wn3/locales...eAPostAsAnswer
>> >> Mark L. Ferguson
>> >> .
>> >>
>> >> "Chonx" <Chonx@discussions.microsoft.com> wrote in message
>> >> news:5FA0C01D-2364-4CF8-B137-8A35835CAEFE@microsoft.com...
>> >> > Hi Mark,
>> >> >
>> >> > I've typed that in but my computer would not accept the /A at the
>> >> > end
>> >> > "could
>> >> > not find the specified file". I tried it without the /A and nothing
>> >> > happened?
>> >> >
>> >> > Thanks
>> >> >
>> >> > "Mark L. Ferguson" wrote:
>> >> >
>> >> >> I would guess from what was in your post that you ran setup and
>> >> >> installed
>> >> >> a
>> >> >> fresh copy of the system, and failed to 'activate' it yet. This
>> >> >> would
>> >> >> lead
>> >> >> to a failure to update to SP2 from the updates site, because
>> >> >> activation
>> >> >> is
>> >> >> required to do that.
>> >> >> To run the activation dialog, go to start/run, and type:
>> >> >> %SYSTEMROOT%\system32\oobe\msoobe.exe /A
>> >> >> --
>> >> >> Was this helpful? Then click the Ratings button. Voting helps the
>> >> >> web
>> >> >> interface.
>> >> >> http://www.microsoft.com/wn3/locales...eAPostAsAnswer
>> >> >> Mark L. Ferguson
>> >> >> .
>> >> >>
>> >> >> "Chonx" <Chonx@discussions.microsoft.com> wrote in message
>> >> >> news:84010DDC-CB7B-4EFD-BB82-710C9BC9274C@microsoft.com...
>> >> >> > Help All,
>> >> >> >
>> >> >> > After my computer was stuck in a loop i rebooted from the Windows
>> >> >> > XP
>> >> >> > cd.
>> >> >> > I
>> >> >> > then went to Windows updates and downloaded all the updates. I
>> >> >> > then
>> >> >> > tried
>> >> >> > to
>> >> >> > install SP2 but was greeted with an "access denied" message. I
>> >> >> > followed
>> >> >> > various replies posted on these fourums to remedy this but it did
>> >> >> > not
>> >> >> > work.
>> >> >> > I then rebooted again from the cd and now i have lost access to
>> >> >> > Windows
>> >> >> > Updates.
>> >> >> >
>> >> >> > On the 1st occasion i have tried using a different admin account,
>> >> >> > unistalling my Panda antivirus and i have tried to follow
>> >> >> > instructions
>> >> >> > to
>> >> >> > use
>> >> >> > a SubInAcl file, this i am out of my depth.
>> >> >> >
>> >> >> > On the 2nd occasion i believe i have lost a jscript.dll file but
>> >> >> > again
>> >> >> > i
>> >> >> > have encountered confiedence problems trying to fix this.
>> >> >> >
>> >> >> > Any ideas anyone?
>> >> >>