No access to one computer

XP Professional, networked workgroup, Netgear router

I have a network with 4 computers all work well except one comp. name PC1

With PC1 I have access to all computers on cable or wifi

None of the others comp. (than PC1) have access to PC1 and that's the
problem.

When I try to access PC1 I get the following message when addressing drive D
on PC1:

\\pc1\d is not accessible . you might not have permission to use this
network resource. contact the administrator of this server to find out if
you have access permissions

Not enough server storage available to process this command

I have reloaded PC1 and it was OK, but the problem came back again.

I have upgraded the LAN card driver

I have upgraded the router software Netgear DG834PN

I had overheating problems with router that is fixed with a fan on it

No problems to access the internet

I would be grateful if any one could help me please

Are you CERTAIN that no software firewall is running within PC1?
Check for Windows firewall, and 3rd party firewalls like Norton and McAfee.

Is PC1 a name-brand computer, like a Dell? If so, these come pre-loaded
with much much software, and you might not realize what's in there.

You didn't say if PC1 EVER worked, or if this problem is recent.
Please tell us more about PC1.

Are all host addresses achieved automatically? i.e, by DHCP server within
the netgear router? That would be a good idea right now.

Go to some computer other than PC1 (give us some names, please) and bring up
"run" box from start button. Type \\PC1 and hit enter. This circumvents
the use of the network browser, which can be unreliable.

Tell us what you find.

"Frank Oz" <frank_sa59@hotmail.com> wrote in message
news:%23KbbgMqVIHA.5160@TK2MSFTNGP05.phx.gbl...
> XP Professional, networked workgroup, Netgear router
>
> I have a network with 4 computers all work well except one comp. name PC1
>
> With PC1 I have access to all computers on cable or wifi
>
> None of the others comp. (than PC1) have access to PC1 and that's the
> problem.
>
> When I try to access PC1 I get the following message when addressing drive
D
> on PC1:
>
> \\pc1\d is not accessible . you might not have permission to use this
> network resource. contact the administrator of this server to find out if
> you have access permissions
>
> Not enough server storage available to process this command
>
> I have reloaded PC1 and it was OK, but the problem came back again.
>
> I have upgraded the LAN card driver
>
> I have upgraded the router software Netgear DG834PN
>
> I had overheating problems with router that is fixed with a fan on it
>
> No problems to access the internet
>
> I would be grateful if any one could help me please
>
>
>

Hi John, Thanks for your reply

Not a brand comp. build locally of best components Gigabyte, Nvidia, 4 gb
ram etc.

I checked the Win firewall in Control P. and in network connections it is
OFF

I use only AVG Anti- Virus and that has no firewall

This problem started when I had Vista running on an other comp. so than I
blamed Vista for it and I believe others had the same problem.

So 3 weeks ago I reloaded the PC1 and all worked fine but the problem came
back again???and PC1 was not stable on the Internet

Than I checked/upgrade lan drivers and Netgear Router and put a fan on the
router.

Result, PC1 stable on the net.

Changed PC1 cable on router ports no change also changed from Lan 1 to Lan 2
no change

When loading a comp. I ask for workgroup and let Win XP do the rest, all I
do than is apply Sharing and security on the HD's and I be very careful with
comp. names.

On the Netgear all comp. are on automatically and there and working fine
according to the Router

On the other computers, PC2, PC3, PC4, I can see all the Hard drives on
PC1 but when clicking on it I get the message ..... see below.

"run" box from start button. Type \\PC1 and hit enter: I have done this
and I got the page \\PC1 and the drives which are nominated for sharing are
there, again clicking on it , the message...

I have checked the management/permissions on PC1 and compared it with the
other PC's looks like ok.

But I am not familiar with the connection settings like , local area
connection/properties etc. but file and printer sharing is on in Local A C

I hope that I have been clear




"John B" <jb@nospam.com> wrote in message
news:gjLij.8360$na4.3312@trnddc05...
> Are you CERTAIN that no software firewall is running within PC1?
> Check for Windows firewall, and 3rd party firewalls like Norton and
> McAfee.
>
> Is PC1 a name-brand computer, like a Dell? If so, these come pre-loaded
> with much much software, and you might not realize what's in there.
>
> You didn't say if PC1 EVER worked, or if this problem is recent.
> Please tell us more about PC1.
>
> Are all host addresses achieved automatically? i.e, by DHCP server within
> the netgear router? That would be a good idea right now.
>
> Go to some computer other than PC1 (give us some names, please) and bring
> up
> "run" box from start button. Type \\PC1 and hit enter. This circumvents
> the use of the network browser, which can be unreliable.
>
> Tell us what you find.
>
> "Frank Oz" <frank_sa59@hotmail.com> wrote in message
> news:%23KbbgMqVIHA.5160@TK2MSFTNGP05.phx.gbl...
>> XP Professional, networked workgroup, Netgear router
>>
>> I have a network with 4 computers all work well except one comp. name PC1
>>
>> With PC1 I have access to all computers on cable or wifi
>>
>> None of the others comp. (than PC1) have access to PC1 and that's the
>> problem.
>>
>> When I try to access PC1 I get the following message when addressing
>> drive
> D
>> on PC1:
>>
>> \\pc1\d is not accessible . you might not have permission to use this
>> network resource. contact the administrator of this server to find out if
>> you have access permissions
>>
>> Not enough server storage available to process this command
>>
>> I have reloaded PC1 and it was OK, but the problem came back again.
>>
>> I have upgraded the LAN card driver
>>
>> I have upgraded the router software Netgear DG834PN
>>
>> I had overheating problems with router that is fixed with a fan on it
>>
>> No problems to access the internet
>>
>> I would be grateful if any one could help me please
>>
>>
>>
>
>

please also look at the group WinXP help & support under same subject it is
there as well and it may help you


"Frank Oz" <frank_sa59@hotmail.com> wrote in message
news:%23KbbgMqVIHA.5160@TK2MSFTNGP05.phx.gbl...
> XP Professional, networked workgroup, Netgear router
>
> I have a network with 4 computers all work well except one comp. name PC1
>
> With PC1 I have access to all computers on cable or wifi
>
> None of the others comp. (than PC1) have access to PC1 and that's the
> problem.
>
> When I try to access PC1 I get the following message when addressing drive
> D on PC1:
>
> \\pc1\d is not accessible . you might not have permission to use this
> network resource. contact the administrator of this server to find out if
> you have access permissions
>
> Not enough server storage available to process this command
>
> I have reloaded PC1 and it was OK, but the problem came back again.
>
> I have upgraded the LAN card driver
>
> I have upgraded the router software Netgear DG834PN
>
> I had overheating problems with router that is fixed with a fan on it
>
> No problems to access the internet
>
> I would be grateful if any one could help me please
>
>
>

On Mon, 14 Jan 2008 22:16:25 +1030, "Frank Oz"
<frank_sa59@hotmail.com> wrote:

>XP Professional, networked workgroup, Netgear router
>
>I have a network with 4 computers all work well except one comp. name PC1
>
>With PC1 I have access to all computers on cable or wifi
>
>None of the others comp. (than PC1) have access to PC1 and that's the
>problem.
>
>When I try to access PC1 I get the following message when addressing drive D
>on PC1:
>
>\\pc1\d is not accessible . you might not have permission to use this
>network resource. contact the administrator of this server to find out if
>you have access permissions
>
>Not enough server storage available to process this command
>
>I have reloaded PC1 and it was OK, but the problem came back again.
>
>I have upgraded the LAN card driver
>
>I have upgraded the router software Netgear DG834PN
>
>I had overheating problems with router that is fixed with a fan on it
>
>No problems to access the internet
>
>I would be grateful if any one could help me please

The "Not enough server storage" message misleading. The problem is
probably that an antivirus program has changed an obscure TCP/IP
setting. Please see this Microsoft Knowledge Base article for a
likely solution, specifying a value of 15 for IRPStackSize on PC1:

Antivirus Software May Cause Event ID 2011
http://support.microsoft.com/?scid=kb;en-us;177078
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com

Thanks Steve

I have changed value of 15 for IRPStackSize on PC1

Still the same , no change at all

I agree perhaps antivirus program has changed an obscure TCP/IP



"Steve Winograd" <bc070521m@comcast.net> wrote in message
news:ckioo39hnq1k3ltkhdr049e3t6jmitu64u@4ax.com...
> On Mon, 14 Jan 2008 22:16:25 +1030, "Frank Oz"
> <frank_sa59@hotmail.com> wrote:
>
>>XP Professional, networked workgroup, Netgear router
>>
>>I have a network with 4 computers all work well except one comp. name PC1
>>
>>With PC1 I have access to all computers on cable or wifi
>>
>>None of the others comp. (than PC1) have access to PC1 and that's the
>>problem.
>>
>>When I try to access PC1 I get the following message when addressing drive
>>D
>>on PC1:
>>
>>\\pc1\d is not accessible . you might not have permission to use this
>>network resource. contact the administrator of this server to find out if
>>you have access permissions
>>
>>Not enough server storage available to process this command
>>
>>I have reloaded PC1 and it was OK, but the problem came back again.
>>
>>I have upgraded the LAN card driver
>>
>>I have upgraded the router software Netgear DG834PN
>>
>>I had overheating problems with router that is fixed with a fan on it
>>
>>No problems to access the internet
>>
>>I would be grateful if any one could help me please
>
> The "Not enough server storage" message misleading. The problem is
> probably that an antivirus program has changed an obscure TCP/IP
> setting. Please see this Microsoft Knowledge Base article for a
> likely solution, specifying a value of 15 for IRPStackSize on PC1:
>
> Antivirus Software May Cause Event ID 2011
> http://support.microsoft.com/?scid=kb;en-us;177078
> --
> Best Wishes,
> Steve Winograd, MS-MVP (Windows Networking)
>
> Please post any reply as a follow-up message in the news group
> for everyone to see. I'm sorry, but I don't answer questions
> addressed directly to me in E-mail or news groups.
>
> Microsoft Most Valuable Professional Program
> http://mvp.support.microsoft.com

On Tue, 15 Jan 2008 18:51:51 +1030, "Frank Oz"
<frank_sa59@hotmail.com> wrote:
>>>XP Professional, networked workgroup, Netgear router
>>>
>>>I have a network with 4 computers all work well except one comp. name PC1
>>>
>>>With PC1 I have access to all computers on cable or wifi
>>>
>>>None of the others comp. (than PC1) have access to PC1 and that's the
>>>problem.
>>>
>>>When I try to access PC1 I get the following message when addressing drive
>>>D
>>>on PC1:
>>>
>>>\\pc1\d is not accessible . you might not have permission to use this
>>>network resource. contact the administrator of this server to find out if
>>>you have access permissions
>>>
>>>Not enough server storage available to process this command
>>>
>>>I have reloaded PC1 and it was OK, but the problem came back again.
>>>
>>>I have upgraded the LAN card driver
>>>
>>>I have upgraded the router software Netgear DG834PN
>>>
>>>I had overheating problems with router that is fixed with a fan on it
>>>
>>>No problems to access the internet
>>>
>>>I would be grateful if any one could help me please
>>
>> The "Not enough server storage" message misleading. The problem is
>> probably that an antivirus program has changed an obscure TCP/IP
>> setting. Please see this Microsoft Knowledge Base article for a
>> likely solution, specifying a value of 15 for IRPStackSize on PC1:
>>
>> Antivirus Software May Cause Event ID 2011
>> http://support.microsoft.com/?scid=kb;en-us;177078
>
>Thanks Steve
>
>I have changed value of 15 for IRPStackSize on PC1
>
>Still the same , no change at all
>
>I agree perhaps antivirus program has changed an obscure TCP/IP

You're welcome, Frank. I'd try higher values, as described in the KB
article.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com

Thanks again Steve now i upped it to 18 and the 1 year problem has gone

Happy


"Frank Oz" <frank_sa59@hotmail.com> wrote in message
news:%23KbbgMqVIHA.5160@TK2MSFTNGP05.phx.gbl...
> XP Professional, networked workgroup, Netgear router
>
> I have a network with 4 computers all work well except one comp. name PC1
>
> With PC1 I have access to all computers on cable or wifi
>
> None of the others comp. (than PC1) have access to PC1 and that's the
> problem.
>
> When I try to access PC1 I get the following message when addressing drive
> D on PC1:
>
> \\pc1\d is not accessible . you might not have permission to use this
> network resource. contact the administrator of this server to find out if
> you have access permissions
>
> Not enough server storage available to process this command
>
> I have reloaded PC1 and it was OK, but the problem came back again.
>
> I have upgraded the LAN card driver
>
> I have upgraded the router software Netgear DG834PN
>
> I had overheating problems with router that is fixed with a fan on it
>
> No problems to access the internet
>
> I would be grateful if any one could help me please
>
>
>

On Wed, 16 Jan 2008 09:45:30 +1030, "Frank Oz"
<frank_sa59@hotmail.com> wrote:
>>>[Snip]
>>>Thanks Steve
>>>
>>>I have changed value of 15 for IRPStackSize on PC1
>>>
>>>Still the same , no change at all
>>>
>>>I agree perhaps antivirus program has changed an obscure TCP/IP
>>
>>You're welcome, Frank. I'd try higher values, as described in the KB
>>article.
>
>Thanks again Steve now i upped it to 18 and the 1 year problem has gone
>
>Happy

You're welcome, Happy. :-)
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com