WiFi Problem

Anatoly Kurilin wrote:
> Hi, it's my first experience with wireless networking.
>
> I acquired D-Link DIR-400 and successfully connected two computers to the
> Internet through Ethernet cables.
>
> Now I'm trying to connect the third computer to to the Internet using WiFi.
> My network is present in the list of wireless networks on the third computer
> but each time I enter the network key of my network, the program fails to
> enable wireless connection without any message.
>
> I tried to disable wireless security but the result was the same.
>
> What do I do wrong?
>
>
> Thanks in advance,
> AK
>
>
>
>

1. Are you sure that the wireless radio in your computer is turned on?
Many laptops with built-in wifi allow the radio to be turned off to save
power. Read the documentation that came with your computer for further
details.

2. Are you sure that you're attempting to connect to *your* network?
That is, did you change the SSID in the router from the default to
something unique (but not your last name or address)?

3. Exactly *how* did you disable wireless security?

4. Is this (http://tinyurl.com/rlhcx) what you see for the list of
networks? If so, does "Unsecured wireless network" appear below the
name of your network? If this screen is not what you see, you're
probably using a non-Windows wireless configuration utility on your
third computer. Please identify what utility you're using and/or
describe what you see in as much detail as possible.

--
Lem -- MS-MVP

To the moon and back with 2K words of RAM and 36K words of ROM.
http://en.wikipedia.org/wiki/Apollo_Guidance_Computer
http://history.nasa.gov/afj/compessay.htm

Hi, it's my first experience with wireless networking.

I acquired D-Link DIR-400 and successfully connected two computers to the
Internet through Ethernet cables.

Now I'm trying to connect the third computer to to the Internet using WiFi.
My network is present in the list of wireless networks on the third computer
but each time I enter the network key of my network, the program fails to
enable wireless connection without any message.

I tried to disable wireless security but the result was the same.

What do I do wrong?


Thanks in advance,
AK

Hi
Try this process it might help to find what is wrong.
My Wireless does not work - http://www.ezlan.net/wireless.html
Jack (MS, MVP-Networking)

"Anatoly Kurilin" <akurilin@nordosoft.ru> wrote in message
news:%23bXnH5hKJHA.5692@TK2MSFTNGP04.phx.gbl...
>
> Hi, it's my first experience with wireless networking.
>
> I acquired D-Link DIR-400 and successfully connected two computers to the
> Internet through Ethernet cables.
>
> Now I'm trying to connect the third computer to to the Internet using
> WiFi. My network is present in the list of wireless networks on the third
> computer but each time I enter the network key of my network, the program
> fails to enable wireless connection without any message.
>
> I tried to disable wireless security but the result was the same.
>
> What do I do wrong?
>
>
> Thanks in advance,
> AK
>
>
>
>

Thanks for the tips. I finally managed to make my WiFi connection work and
got access to the Internet. But this connection works in a strange way - it
starts working OK but then begins to work slower and slower. Finally it
actually stops until I restart the computer.

I use the security mode: Enable WPA/WPA2 Auto Wireless Security (enhanced).

"Jack (MVP-Networking)." <jack@discussiongroup.com> ???????/???????? ?
???????? ?????????: news:ebvJbimKJHA.5532@TK2MSFTNGP02.phx.gbl...
> Hi
> Try this process it might help to find what is wrong.
> My Wireless does not work - http://www.ezlan.net/wireless.html
> Jack (MS, MVP-Networking)
>
> "Anatoly Kurilin" <akurilin@nordosoft.ru> wrote in message
> news:%23bXnH5hKJHA.5692@TK2MSFTNGP04.phx.gbl...
>>
>> Hi, it's my first experience with wireless networking.
>>
>> I acquired D-Link DIR-400 and successfully connected two computers to the
>> Internet through Ethernet cables.
>>
>> Now I'm trying to connect the third computer to to the Internet using
>> WiFi. My network is present in the list of wireless networks on the third
>> computer but each time I enter the network key of my network, the program
>> fails to enable wireless connection without any message.
>>
>> I tried to disable wireless security but the result was the same.
>>
>> What do I do wrong?
>>
>>
>> Thanks in advance,
>> AK
>>
>>
>>
>>
>